![serial de bartender 10.1 serial de bartender 10.1](http://1.bp.blogspot.com/-nzk-RJAPG98/UBEnsQgUKpI/AAAAAAAAJXw/LZ7mqR3YE3c/s1600/6.jpg)
SPEC 8 includes the Status and Weight Condition bytes in the data sent to BarTender. SPEC 7 removes extraneous information, such as the scale number and header, from the data sent to BarTender. SPEC 6 instructs the scale to return weight data when queried, even if the weight is unstable. This means that the scale will output weight data only in response to the command. SPEC 5 calls for the Standard Command Type.
Serial de bartender 10.1 serial#
SPEC 3-4 control the serial port settings in this case, baud = 9600, data length = 8 bits, stop bits = 1, no parity, and no handshake.
![serial de bartender 10.1 serial de bartender 10.1](https://pixhost.icu/avaxhome/ce/ae/0030aece_medium.jpeg)
SPEC numbers 0-2 are not relevant to the scale's communication with BarTender. The SPEC numbers must have the following settings in order to communicate with BarTender: To configure the correct settings, press the key 3 times on the DIGI display, while holding down the button. When using a scale in the DIGI DI-162 series, BarTender communicates to the scale using the Standard Command Type. For more information, consult the scale's user manual. In addition, the scale must have a response format so that BarTender can distinguish the tare weight from the net weight.īelow, you can find information about how the supported scales must be configured in order to communicate with BarTender. In order for BarTender to support the scale's built-in tare feature, the scale must support the Tare and Get Tare Weight commands.
Serial de bartender 10.1 software#
All other commands are optional.īarTender can emulate stable weight and tare features in the software if configured properly. Requests the scale to clear the tare weight.Īt a minimum, BarTender requires the scale to support either the Request Immediate Weight or the Request Stable Weight command. Requests and receives the tare weight from the scale.Ĭlear Tare Weight. Sends the tare weight (i.e., the weight of the unladen container) to the scale. Requests and receives weight data when the scale is in a stable state. Requests and receives the weight data, even if the scale is in an unstable state. For BarTender to work correctly, the weight units must not be suppressed.īarTender uses five basic commands for communicating with the scale: When multiple data modes are supported, the scale must be configured on its front panel to the "Command/Response" mode prior to use with BarTender.Īdditionally, some scales can be configured to suppress the weight units in the returned weight data. While many scales can be configured to continuously send data to the PC, BarTender does not support this unsolicited data-streaming mode. Using this "Command/Response" methodology, BarTender polls the scale at a regular interval to request weight data and the scale is expected to respond with the requested weight data within a reasonable amount of time. A response or response pattern is the scale's response to the specified command. A command is the set of instructions sent by BarTender to the scale that tells the scale to do something. When using scales, BarTender supports the "Command/Response" methodology to communicate with the scale. Weighing Scale Configuration Weighing Scale Configuration